Tolerâncias de Usinagem CNC —
Normas, Ajustes e Dimensionamento Geométrico
Um guia prático de tolerâncias, acabamentos superficiais e GD&T para peças usinadas CNC. Entender essas normas ajuda a projetar peças fabricáveis, mensuráveis e econômicas.
Entendendo as Tolerâncias de Usinagem CNC
Uma tolerância é o intervalo permissível de variação dimensional para uma característica fabricada. If a shaft is designed at 25.000 mm with a tolerance of ±0.01 mm, any shaft measuring between 24.990 mm and 25.010 mm is acceptable. Tolerances exist because perfect accuracy is physically impossible — and unnecessary: most parts function perfectly within a defined range.
Tighter tolerances cost more — not because precision is inherently expensive, but because it requires slower feed rates, additional finishing passes, higher-grade tooling, and more time on CMM inspection. A ±0.005 mm hole might require a finish boring operation and 100% CMM inspection where a ±0.05 mm hole is inspected by sampling. Specify only what function demands.
The table below covers Ginwate's standard, tight and precision tolerance capabilities across our main processes. Where no tolerance is called out on a drawing, we default to ISO 2768-m (medium) for linear dimensions and ISO 2768-K for geometric tolerances.
Capacidade de Tolerância por Característica
Faixas de tolerância padrão, ajustada e de precisão para todos os principais tipos de características. Values for aluminum unless otherwise noted.
| Feature | Standard | Tight | Precision |
|---|---|---|---|
| General Linear Dimensions | ±0.1 mm | ±0.01 mm | ±0.005 mm |
| Hole Diameter (milled) | ±0.05 mm | ±0.01 mm | ±0.005 mm |
| Shaft / Pin Diameter (turned) | ±0.05 mm | ±0.005 mm | ±0.003 mm |
| Bore Diameter (turned) | ±0.05 mm | ±0.005 mm | ±0.003 mm |
| Swiss CNC Diameter | ±0.01 mm | ±0.005 mm | ±0.003 mm |
| 5-Axis Compound Features | ±0.02 mm | ±0.005 mm | ±0.001 mm |
| Flatness | 0.1 mm / 100mm | 0.02 mm / 100mm | 0.005 mm / 100mm |
| Parallelism | 0.1 mm | 0.02 mm | 0.005 mm |
| Perpendicularity | 0.1 mm | 0.02 mm | 0.01 mm |
| Concentricity / Runout | 0.05 mm TIR | 0.01 mm TIR | 0.005 mm TIR |
| True Position (milled hole) | ±0.1 mm dia. | ±0.02 mm dia. | ±0.01 mm dia. |
| Thread Pitch Diameter | 6H / 6g class | 5H / 5g class | 4H / 4g class |
| Surface Finish Ra | 1.6–3.2 μm | 0.8 μm | 0.4 μm |
| Surface Finish Rz | 12.5 μm | 6.3 μm | 1.6 μm |
| Angular Tolerance | ±0.5° | ±0.1° | ±0.05° |
Precision tolerances require DFM review, additional inspection and may increase lead time. Availability depends on material, part geometry and feature size. Contact us to confirm.
Graus de Tolerância ISO
ISO 2768 define tolerâncias gerais para dimensões lineares. Graus de maior precisão custam mais e aumentam o prazo de entrega.
Acabamento Superficial (Valores Ra)
Ra (rugosidade média) é a especificação de acabamento mais comum. Nossas máquinas atingem Ra 0,4 μm padrão e Ra 0,2 μm com retificação fina.
Tolerâncias Geométricas (GD&T)
GD&T fornece uma linguagem para comunicar a intenção de projeto além das dimensões lineares.
Referenced to a machined datum face. Use 5-axis for compound angle perpendicularity.
Requires precision datum registration. Achievable on grinding to 0.002 mm.
Affected by fixturing spring and material stress relief. Grinding recommended for tight flatness.
Measured in CMM. Achievable through cylindrical grinding after turning.
Combined roundness + straightness. Grinding post-turning for <0.005 mm.
Use coordinate boring or jig boring for ≤0.02 mm. 5-axis reduces repositioning error.
Measured during turning or on CMM. Grinding after turning for <0.005 mm TIR.
Full surface runout. Requires accurate live-centre between-centres turning.
5-axis machining and tilted-head boring for tight angular features.
Complex surface profiles verified on CMM. 5-axis recommended for bilateral tolerance.
All GD&T measurements performed on Zeiss CMM with Calypso measurement software. First-article inspection reports available with FAIR documentation.
Tolerâncias Alcançáveis por Material
Material properties — thermal expansion, machinability, and springback — affect achievable tolerances. Here are the tightest tolerances we routinely hold for each material.
| Material | Tightest Achievable | Notes |
|---|---|---|
| Aluminum (6061, 7075) | ±0.003 mm | Best machinability. Standard tight tolerances routinely achieved. |
| Brass (C360) | ±0.003 mm | Free-machining. Excellent dimensional stability. |
| Stainless Steel 303 | ±0.005 mm | Good machinability vs other SS grades. Work-hardening limited. |
| Stainless Steel 316L | ±0.005 mm | Work-hardens. Requires sharp tools and controlled feeds. |
| Titanium Ti-6Al-4V | ±0.005 mm | Low thermal conductivity increases tool wear. Achievable with correct tooling. |
| 4140 Alloy Steel | ±0.005 mm | Heat treat distortion possible — machine after final heat treatment where possible. |
| PEEK | ±0.01 mm | Plastic creep under clamping load. Requires careful fixturing strategy. |
| Delrin (POM) | ±0.01 mm | Absorbs moisture — allow for environmental dimensional change in tight-fit applications. |
Dicas de Projeto para Tolerâncias
Aplicar esses princípios reduz custos e prazo garantindo que as peças atendam aos requisitos funcionais.
- Apply tolerances only where functionally required — tighter-than-necessary tolerances increase cost significantly (±0.01 mm may cost 2–5× more than ±0.1 mm for the same feature).
- Use GD&T rather than coordinate tolerances for mating features — true position controls location far better than bilateral +/- dimensions on X and Y separately.
- Provide a datum hierarchy on your 2D drawing — without clear datums, our engineers cannot guarantee that measured dimensions will match design intent.
- Specify surface finish only on functional surfaces — 'all surfaces Ra 0.8' adds unnecessary cost and lead time. Leave non-functional faces as machined.
- Design features to be accessible from one setup direction where possible — repositioning introduces additional error. 5-axis helps when this is unavoidable.
- Consider material spring-back for thin-walled parts — aluminum walls <2 mm and titanium walls <1.5 mm can deflect during cutting, effectively moving the surface from its nominal position.
- Thread callouts must specify form, class and depth — 'M8 thread' alone is ambiguous. Use 'M8×1.25 – 6H × 20mm deep' to be complete.
- For press or interference fits, specify the fit class (H7/p6, H7/n6) and let us calculate the actual dimension limits — ISO 286 fit notation is unambiguous and internationally understood.
Revisão DFM Gratuita
Carregue seu desenho com a solicitação de orçamento. Nossos engenheiros revisam cada arquivo em busca de conflitos de tolerância e problemas de projeto — gratuitamente, antes do início da produção.
Carregar Arquivos para RevisãoRelatórios de Inspeção Disponíveis
- First Article Inspection Report (FAIR)
- CMM Dimensional Report (Zeiss)
- Surface Roughness Certificate (Ra/Rz)
- Material Test Report (MTR / Mill Cert)
- PPAP Level 1–3 Documentation
- AS9102 First Article Inspection
Serviços Relacionados
Fresamento CNC
Tolerâncias e capacidades de fresamento 3, 4 e 5 eixos.
Torneamento CNC
Especificações de tolerância de torneamento e Swiss e limites de diâmetro.
Usinagem 5 eixos
Tolerâncias mais apertadas em geometria composta em uma única fixação.
Todas as Capacidades
EDM, retificação, inspeção CMM e visão completa do parque de máquinas.
Precisa de Peças com Tolerâncias Rigorosas?
Carregue seus arquivos CAD e desenhos para uma análise DFM gratuita.
